DENX . DULG . UBootCmdGroupSpecial

5.9.8. Special Commands

5.9.8.1. i2c - I2C sub-system

=> help i2c
i2c - I2C sub-system

Usage:
i2c speed [speed] - show or set I2C bus speed
i2c md chip address[.0, .1, .2] [# of objects] - read from I2C device
i2c mm chip address[.0, .1, .2] - write to I2C device (auto-incrementing)
i2c mw chip address[.0, .1, .2] value [count] - write to I2C device (fill)
i2c nm chip address[.0, .1, .2] - write to I2C device (constant address)
i2c crc32 chip address[.0, .1, .2] count - compute CRC32 checksum
i2c probe - show devices on the I2C bus
i2c reset - re-init the I2C Controller
i2c loop chip address[.0, .1, .2] [# of objects] - looping read of device
i2c sdram chip - print SDRAM configuration information
=>

----- Revision r1.4 - 20 Jun 2008 - 12:39 - Main.www-data
Copyright © 2002-2020 by DENX Software Engineering