SDRAM - Synchronous Dynamic RAM

SDRAM has become ubiquitous for relatively fast, inexpensive read/write memory (RAM). The SDRAM interface was created/adopted/popularized by Intel with the PentiumTM class processors. Its number one distinguishing feature is that it pipelines commands (e.g. read/write operations) using a state machine. Thus the processor has a state machine in its SDRAM controller logic and the SDRAM has its internal state machine. In order to have both state machines in lock-step operation, the SDRAM has configuration registers that need to be initialized by the processor using special configuration cycles. The resulting start up code that initializes the SDRAM registers looks pretty odd and entirely mysterious.

ALERT! If the SDRAM initialization is not done exactly as required by the SDRAM's data sheet, the processor's data sheet, and taking into account bus speeds, etc., the processor's memory controller and the SDRAM state machines will get out of sync. The result is unreliable memory operations, particularly burst reads and writes. Note that simple and even moderately complex memory read and write operations will appear to work, but when the processor starts using the pipelining heavily (typically due to lots of cache read and write activity and DMA activity), the two will lose synchronization and cause memory read/write errors.

----- Revision r1.1 - 27 Aug 2004 - 20:29 - JerryVanBaren
Copyright © 2002-2020 by DENX Software Engineering