DENX . DULG . LinuxBootIntro

7.1. Introduction

In principle, if you have a Linux kernel image and the flattened device tree blob somewhere in system memory (RAM, ROM, flash...), then all you need to boot the system is the bootm command. Assume a Linux kernel image has been stored at address 0xFC000000 and the flattened device tree blob has been stored at address 0xFC1E0000 - then you can boot this image with the following command:

=> bootm FC000000 - FC1E0000

----- Revision r1.6 - 20 Oct 2011 - 07:00 - HeikoSchocher
Copyright © 2002-2019 by DENX Software Engineering