DENX . DULG . HowToIncreaseSizeOfRamdisk

14.4.2. How to Increase the Size of the Ramdisk

  1. Extract compressed ramdisk image (ramdisk.gz) from U-Boot image:
    bash$ dd if=uRamdisk bs=64 skip=1 of=ramdisk.gz
    21876+1 records in
    21876+1 records out
  2. Uncompress ramdisk image
    bash$ gunzip -v ramdisk.gz
    ramdisk.gz:      66.6% -- replaced with ramdisk
  3. Mount ramdisk image
    As root:
    bash# mkdir -p /mnt/tmp
    bash# mount -o loop ramdisk /mnt/tmp
  4. Create new ramdisk image, say 8 MB big:
    bash$ dd if=/dev/zero of=new_ramdisk bs=1024k count=8
    bash$ /sbin/mke2fs -F -m0 new_ramdisk
    bash$ /sbin/tune2fs -c 0 new_ramdisk
    As root:
    bash# mkdir -p /mnt/new
    bash# mount -o loop new_ramdisk /mnt/new
  5. Copy files from old ramdisk to new ramdisk:
    As root:
    bash# cd /mnt/tmp
    bash# find . -depth -print | cpio -VBpdum /mnt/new
    Now you can add, remove, or modify files in the /mnt/new directory. If you are done, you can re-pack the ramdisk into a U-Boot image:
  6. Unmount ramdisk images:
    As root:
    bash# umount /mnt/tmp
    bash# umount /mnt/new
  7. Compress new ramdisk image
    bash$ gzip -v9 new_ramdisk
    ramdisk:         66.6% -- replaced with new_ramdisk.gz
  8. Create new U-Boot image (new-uRamdisk)
    bash$ mkimage -T ramdisk -C gzip -n 'New Simple Embedded Linux Framework' \
    > -d new_ramdisk.gz new_uRamdisk
    Image Name:   Simple Embedded Linux Framework
    Created:      Sun May  4 13:23:48 2003
    Image Type:   PowerPC Linux RAMDisk Image (gzip compressed)
    Data Size:    1400121 Bytes = 1367.31 kB = 1.34 MB
    Load Address: 0x00000000
    Entry Point:  0x00000000

----- Revision r1.2 - 03 Apr 2004 - 13:48 - WolfgangDenk
Copyright © 2002-2020 by DENX Software Engineering