DENX . DULG . FlashFilesystemsJFFS

9.1.2. Journalling Flash File System

At the moment it seems that the Journalling Flash File System JFFS is the best choice for filesystems in flash memory of embedded devices. You must enable the following configuration options to get JFFS support in your system:


If the flash device is erased, we can simply mount it, and the creation of the JFFS filesystem is performed automagically.

TIP Note: For simple accesses like direct read or write operations or erasing you use the character device interface (/dev/mtd*) of the MTD layer, while for filesystem operations like mounting we must use the block device interface (/dev/mtdblock*).

# eraseall /dev/mtd2
Erased 4096 Kibyte @ 0 -- 100% complete.       
# mount -t jffs /dev/mtdblock2 /mnt
# mount
/dev/root on / type nfs (rw,v2,rsize=4096,wsize=4096,hard,udp,nolock,addr=
proc on /proc type proc (rw)
devpts on /dev/pts type devpts (rw)
/dev/mtdblock2 on /mnt type jffs (rw)
# df
Filesystem           1k-blocks      Used Available Use% Mounted on
/dev/root              2087212   1232060    855152  60% /
/dev/mtdblock2            3584         0      3584   0% /mnt

Now you can access the files in the JFFS filesystem in the /mnt directory.

----- Revision r1.1 - 29 Jul 2003 - 16:49 - Main.adm
Copyright © 2002-2022 by DENX Software Engineering