DENX . DULGData_tqm8548 . UBootNandHelp
|
=> help nand
nand info - show available NAND devices
nand device [dev] - show or set current device
nand read[.jffs2] - addr off|partition size
nand write[.jffs2] - addr off|partition size - read/write `size' bytes starting
at offset `off' to/from memory address `addr'
nand erase [clean] [off size] - erase `size' bytes from
offset `off' (entire device if not specified)
nand bad - show bad blocks
nand dump[.oob] off - dump page
nand scrub - really clean NAND erasing bad blocks (UNSAFE)
nand markbad off - mark bad block at offset (UNSAFE)
nand biterr off - make a bit error at offset (UNSAFE)
nand lock [tight] [status] - bring nand to lock state or display locked pages
nand unlock [offset] [size] - unlock section
=>
----- Revision r1.1 - 20 Jun 2008 - 13:08 - Main.www-data
|
Copyright © 2002-2021 by DENX Software Engineering