UBootBoot < DULGData_tqm8548

<verbatim>
=>
=> resetþ

U-Boot 1.3.3-00137-g8355758-dirty (Jun   9 2008 - 09:42:03)

CPU:   8548_E, Version: 2.1, (0x80390021)
Core:  E500, Version: 2.2, (0x80210022)
Clock Configuration:
       CPU:1334 MHz, CCB: 534 MHz,
       DDR: 267 MHz (534 MT/s data rate), LBC:   33 MHz
L1:    D-cache 32 kB enabled
       I-cache 32 kB enabled
Board: TQM8548
I2C:   ready
DTT:   1 is 39 C
DRAM:  512 MB (CL=3)
FLASH: 128 MB
L2:    512 KB enabled
NAND:  512 MiB
PCI1:  32 bit, 33 MHz, sync, host, arbiter
          Scanning PCI bus 00
       PCI on bus 00..00
PCIe:  Root complex, base address e000a000
          Scanning PCI bus 02
       PCIe on bus 01..02
In:    serial
Out:   serial
Err:   serial
Net:   TSEC0, TSEC1, TSEC2, TSEC3
PS/2:  No device found
Kbd:   reset failed, no ACK

Type "run flash_nfs" to mount root filesystem over NFS

Hit any key to stop autoboot:  0
=>
</verbatim>