=> setenv kernel_addr FE000000
=>
=> prot off FE000000 FE17FFFF
Un-Protected 6 sectors
=>
=> era FE000000 FE17FFFF
...... done
Erased 6 sectors
=>
=> tftp 100000 /tftpboot/tqm8548/uImage-duts
Speed: 100, full duplex
Using TSEC0 device
TFTP from server 192.168.3.1; our IP address is 192.168.3.123
Filename '/tftpboot/tqm8548/uImage-duts'.
Load address: 0x100000
Loading: #################################################################
##################################
done
Bytes transferred = 1439847 (15f867 hex)
=>
=> imi 100000
## Checking Image at 00100000 ...
Legacy image found
Image Name: Linux-2.6.26-rc5-dirty
Created: 2008-06-08 12:06:49 UTC
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 1439783 Bytes = 1.4 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
=>
=> setenv ram_ws 100000
=>
=> cp.b ${ram_ws} ${kernel_addr} ${filesize}
Copy to Flash... done
=>
=> iminfo ${kernel_addr}
## Checking Image at fe000000 ...
Legacy image found
Image Name: Linux-2.6.26-rc5-dirty
Created: 2008-06-08 12:06:49 UTC
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 1439783 Bytes = 1.4 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
=>
=> saveenv
Saving Environment to Flash...
Un-Protected 1 sectors
Un-Protected 1 sectors
Erasing Flash...
. done
Erased 1 sectors
Writing to Flash... done
Protected 1 sectors
Protected 1 sectors
=>
