Skip to main content.

=> setenv kernel_addr FE000000
=> prot off FE000000 FE17FFFF
Un-Protected 6 sectors
=> era FE000000 FE17FFFF

...... done
Erased 6 sectors
=> tftp 100000 /tftpboot/tqm8548/uImage-duts
Speed: 100, full duplex
Using TSEC0 device
TFTP from server 192.168.3.1; our IP address is 192.168.210.7
Filename '/tftpboot/tqm8548/uImage-duts'.
Load address: 0x100000
Loading: #################################################################
    ##################################
done
Bytes transferred = 1439847 (15f867 hex)
=> imi 100000

## Checking Image at 00100000 ...
   Legacy image found
   Image Name:    Linux-2.6.26-rc5-dirty
   Created:    2008-06-08  12:06:49 UTC
   Image Type:    PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    1439783 Bytes =  1.4 MB
   Load Address: 00000000
   Entry Point:    00000000
   Verifying Checksum ... OK
=> setenv ram_ws 100000
=> cp.b ${ram_ws} ${kernel_addr} ${filesize}
Copy to Flash... done
=> iminfo ${kernel_addr}

## Checking Image at fe000000 ...
   Legacy image found
   Image Name:    Linux-2.6.26-rc5-dirty
   Created:    2008-06-08  12:06:49 UTC
   Image Type:    PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    1439783 Bytes =  1.4 MB
   Load Address: 00000000
   Entry Point:    00000000
   Verifying Checksum ... OK
=> saveenv
Saving Environment to Flash...
Un-Protected 1 sectors
Un-Protected 1 sectors
Erasing Flash...
. done
Erased 1 sectors
Writing to Flash... done
Protected 1 sectors
Protected 1 sectors
=>