Skip to main content.

5.4.3. Installation using U-Boot

If U-Boot is already installed and running on your board, you can use these instructions to download another U-Boot image to replace the current one.

ALERT! Warning: Before you can install the new image, you have to erase the current one. If anything goes wrong your board will be dead. It is strongly recommended that you make sure that:

ALERT! Proceed as follows:

Note: Included topic DULGData.canyonlandsInstallUBootUsingUBoot? does not exist yet

5.4.2. Installation Using a BDM/JTAG Debugger 1. Abstract 5.5. Tool Installation
Prev Home Next