Skip to main content.
Navigation:
DENX
>
DULG
>
UBootInstallUsingUBoot
Translations:
Edit
|
Attach
|
Raw
|
Ref-By
|
Printable
|
More
DULG
Sections of this site:
DENX Home
|
DULG
|
ELDK-5
|
Know
|
Training
|
U-Boot
|
U-Bootdoc
Topics
DULG Home
BoardSelect
Manual
FAQ
Application Notes
Changes
Index
List of pages in DULG
Search
%SECTION0{name=UBootInstallUBoot}% Installation using U-Boot If U-Boot is already installed and running on your board, you can use these instructions to download another U-Boot image to replace the current one. %X% Warning: Before you can install the new image, you have to erase the current one. If anything goes wrong your board will be dead. It is _strongly_ recommended that: * you have a backup of the old, working U-Boot image * you know how to install an image on a virgin system %X% Proceed as follows: %INCLUDE{DULGData_%BOARD%.InstallUBootUsingUBoot}%
5.4.2. Installation Using a BDM/JTAG Debugger
1. Abstract
5.5. Tool Installation
Prev
Home
Next
