DENX . DULG . UBootInstallUsingFirmware

Topic UBootInstallUsingFirmware not in WebOrder Installation using firmware

Note: Included topic DULGData.canyonlandsInstallUBootUsingFirmware? does not exist yet

Note regarding the AMCC Bamboo 440 eval board: with a rev 2 bamboo board using PIBS level 12, I found the proper command for loading the uboot binary image into large NOR flash (a.k.a. opcode flash) to be:

storefile bin eth 0xd7f80000

Using the address documented above (0x87ff80000) resulted in an "address out of range" error from PIBS.

----- Revision r1.4 - 30 Nov 2005 - 17:38 - FrankLichtenheld
Copyright © 2002-2021 by DENX Software Engineering