Skip to main content.
Navigation:
DENX
>
DULG
>
LITE5200USBDoesNotWork
Translations:
Edit
|
Attach
|
Raw
|
Ref-By
|
Printable
|
More
DULG
Sections of this site:
DENX Home
|
DULG
|
ELDK-5
|
Know
|
Training
|
U-Boot
|
U-Bootdoc
Topics
DULG Home
BoardSelect
Manual
FAQ
Application Notes
Changes
Index
List of pages in DULG
Search
%SECTION0{name=LITE5200USBDoesNotWork}% USB does not work on Lite5200 board Question:: USB does not work on my Lite5200 board. Also, the green LED behind the USB connector remains always off. Why? Answer:: This is a hardware problem. The green LED must be on as soon as you power on the Lite5200 board. As a workaround you can short-circuit resistor R164 (bottom side of the board, close to the USB connector). Please note that you will probably lose all warranty and/or may ruin the board. You have been warned.
14.7.1. LITE5200 Installation Howto
1. Abstract
15. Glossary
Prev
Home
Next
