14.7.2. USB does not work on Lite5200 board
- Question:
- USB does not work on my Lite5200 board. Also, the green LED behind the USB connector remains always off. Why?
- Answer:
- This is a hardware problem. The green LED must be on as soon as you power on the Lite5200 board. As a workaround you can short-circuit resistor R164 (bottom side of the board, close to the USB connector). Please note that you will probably lose all warranty and/or may ruin the board. You have been warned.
14.7.1. LITE5200 Installation Howto | 1. Abstract | 15. Glossary | |||
Prev | Home | Next | |||