- I am trying to reduce the size of the u-boot.bin file so that it fits into 256 KB. I disabled all the drivers that I didn't need but the binary size is still 512KB, it seems to be a hard number coded in somewhere. Where can the image size be altered from?
- Some processors have a fixed reset vector address at
0xFFFFFFFC, so the U-Boot image has to include that address,
i. e. it covers the full range from the start address to the
end of the 32 bit address space. In such a case, the start
address must be changed - check the setting of
TEXT_BASEin your board/<name>/config.mk file.
|14.2.10. U-Boot Doesn't Run after Upgrading my Compiler||1. Abstract||14.2.12. Erasing Flash Fails|