Skip to main content.

Topic FaQtqm885dCorruptedPacketsOnFEC1 not in WebOrder Corrupted Packets on FEC1

If I use the FEC1 ethernet interface on the TQM885D board, packets are corrupted. Why?

This is because of to much input load on the FEC1 signals if jumper X33 is set on the TQM8xxL base board. If you use the FEC1 ethernet interface (with a FETHD_USB_8xx_ADAP adapter board plugged on the TQM8xxL base board), make sure that jumper X33 on the base board is not set.