AN2004_06_CoralPInstallation < DULG

---+ Installing a Coral-P PCI Evaluation Board

The following table lists the jumpers settings that we used during our tests of the Linux X11
graphics drivers (including streaming video support):

%TABLE{ headeralign="left, left" cellpadding="4" databg="#FFFFFF" }%
| *Jumper* | *on Rev. 4.0 Board* | *on Rev. 5.0 Board* |
| J51 | all open | all open |
| J52 | closed | closed |
| J53 | closed | closed |
| J100 | closed | closed |
| J101 | open | open |
| J102 | closed | closed |
| J103 | closed | closed |
| J104 | open | open |
| J151 | 1-2 (int A#)<br>9-10 | 1-2 (int A#)<br>9-10 |
| J152 | closed | closed |
| J153 | closed | closed |
| J201 | open | open |
| J202 | open | open |
| J203 | open | open |
| J204 | open | open |
| J205 | open | open |
| J206 | open | open |
| J250 | closed | closed |
| J251 | (not available) | closed |
| J300 | open | open |
| J301 | open | open |
| J500 | open | open |
| J501 | closed | closed |
| JP1 | 1-2 | 1-2 |
| JP2 | 1-2 | 1-2 |
| JP3 | 1-2 | 1-2 |
| JP4 | 2-3 | 2-3 |
| JP150 | 1-2 | 1-2 |
| JP250 | 1-2 | 1-2 |
| JP251 | 1-2 | 1-2 |
| JP252 | 1-2 | 1-2 |
| JP253 | 2-3 | 1-2 |
| JP254 | 2-3 | 1-2 |
| JP300 | 2-3 | 2-3 |
| JP550 | 1-2 | open |

---+++ Jumper settings on Coral-P Rev. 4.0:

<img src="%ATTACHURLPATH%/Coral-P-Rev-4.0.jpg" alt="Coral-P-Rev-4.0.jpg"  width="1525" height="913"  />

---+++ Jumper settings on Coral-P Rev. 5.0:

<img src="%ATTACHURLPATH%/Coral-P-Rev-5.0.jpg" alt="Coral-P-Rev-5.0.jpg"  width="1528" height="917"  />