Skip to main content.

14.7.2. USB does not work on Lite5200 board

Question:
USB does not work on my Lite5200 board. Also, the green LED behind the USB connector remains always off. Why?

Answer:
This is a hardware problem. The green LED must be on as soon as you power on the Lite5200 board. As a workaround you can short-circuit resistor R164 (bottom side of the board, close to the USB connector). Please note that you will probably lose all warranty and/or may ruin the board. You have been warned.
14.7.1. LITE5200 Installation Howto 1. Abstract 15. Glossary
Prev Home Next